金致誠塑膠五金 Jinzhicheng Plastic & Hardware 東莞市金致誠塑膠五金科技有限公司 Dongguan Jinzhicheng Plastic & Hardware Technology Co., Ltd.
注塑開模 · 精密機加 · 車床件 Tooling · Moulding · Machined parts

開模、射出、機加,
在同一個廠區做完。

Tooling, moulding and machining,
finished under one roof.

東莞市金致誠塑膠五金科技有限公司成立於 2019 年,廠房 2,000 平方米,員工 30 餘人。客戶主要來自消防、安防、通訊與工業設備領域,也承接汽車、家電與電子類零件;供應塑膠外殼、金屬結構件與車削件。可看圖報價,先打樣再談量產。

Founded in 2019 with a 2,000 m² plant, 30+ staff, Jinzhicheng mostly serves the fire-safety, security, communication and industrial equipment sectors, and also takes on automotive, appliance and electronics parts. We supply plastic enclosures, metal structural parts and turned components. Send drawings for a quote; we prove the part with a sample before volume.

25 注塑機Injection presses 80–350 T
23 CNC 加工中心Machining centres ±0.01 mm
8 數控車床CNC lathes 螺紋與接頭件Threads & fittings
2,000 平方米廠房m² floor space 30+ 名員工30+ staff

能力與規格Capability

Specification
成立年份Established2019
廠房面積Floor space2,000 m²
員工Staff30+ 人people
注塑機Injection moulding25 台 · 80–350 Tpresses · 80–350 T
CNC 加工中心CNC machining centres23 台 · 精度 ±0.01 mmunits · ±0.01 mm
數控車床CNC lathes8 台units
模具Tooling廠內設計與製作,開模 25–30 天,T1 樣品 7–10 天Designed and built in-house; 25–30 days to tooling, T1 samples in 7–10 days
表面處理Surface finishing外協:陽極氧化、電鍍、噴塗(由我們管控供應商與出貨檢驗)Outsourced — anodising, plating, painting, managed and inspected by us

我們是源頭工廠,模具、射出、機加與車削都在廠內完成,客戶只需對一個窗口。表面處理為外協,但外協工件由我們檢驗後出貨。

適用範圍:中小批量、多品種的結構件與外殼。單一批量小、改版頻繁的案子,我們比大型廠更有彈性。

We are the source factory: tooling, moulding, machining and turning all happen in-house, so you deal with one contact. Surface finishing is outsourced, but every outsourced part is inspected before shipment.

Best fit: small-to-mid volume, multi-variant structural parts and enclosures. For frequent revisions and low batch sizes we are more flexible than a large plant.

工藝與材料Process & materials

Process

注塑射出與外殼

Moulding & enclosures

Injection
  • PC、PC+ABS、ABS、PA66(含加纖)、POM
  • 阻燃 V-0 料可選,配合安防與消防類產品
  • 卡扣、防水膠條槽、螺柱預埋一體設計
  • 細紋、高光、蝕紋依圖處理
  • PC, PC+ABS, ABS, PA66 (incl. GF), POM
  • Flame-retardant V-0 grades for safety and security products
  • Snap fits, gasket grooves and insert bosses moulded in
  • Fine texture, high gloss and EDM grain per drawing

精密機加

Precision machining

CNC
  • 鋁合金 6061-T6、7075-T6
  • 不鏽鋼 303/316L、黃銅
  • 加工精度 ±0.01 mm,配合首件檢查與尺寸報告
  • 硬質陽極氧化(外協)、去毛刺與清洗
  • Aluminium 6061-T6, 7075-T6
  • Stainless 303/316L, brass
  • Thin walls, deep holes and complex profiles to drawing
  • ±0.01 mm tolerance, first-article checks and dimensional reports
  • Hard anodising (outsourced), deburring and cleaning

車床件

Turned parts

Turning
  • 天線座、接頭、螺柱、轉接件、螺絲
  • 螺紋依 BSP/NPSH/NH/Storz/Machino 規格加工
  • 通止規檢驗、首件檢查、尺寸報告
  • 可附材質證明
  • Antenna bases, connectors, studs, adaptors, screws
  • Threads to BSP / NPSH / NH / Storz / Machino
  • Go/no-go gauging, first-article inspection, dimensional report
  • Material certificates on request
外協配套Outsourced steps

壓鑄、沖壓、鈑金、陽極氧化、電鍍與噴塗由固定協作廠完成。圖面、公差與交期仍由我們管控,進貨逐批檢驗——你可以把整套件交給我們,不必自己湊工序。

Die casting, stamping, sheet metal, anodising, plating and painting are handled by long-term partner shops. Drawings, tolerances and lead times stay under our control, with incoming inspection — hand us the whole part, not one step.

我們做的件What we make

Products
01
五金結構件Metal structural parts支架、面板、固定片、緊固與連接件,機加後可做陽極或電鍍。Brackets, panels, retainers, fastening and joint parts — machined, then anodised or plated.
02
塑膠五金組合件Plastic-and-metal assemblies外殼加螺柱、嵌件、彈片,出廠即為可裝配的組合件。Enclosures with studs, inserts and springs, delivered as ready-to-assemble units.
03
模具Moulds & tooling注塑模具設計、製作、試模與修模,開模 25–30 天。Design, build, trial and rework of injection moulds; 25–30 days to tooling.
04
通用機械設備配件Machinery parts傳動件、護罩、機架連接件等設備配套件。Drive parts, guards, frame connectors and other equipment fittings.
05
通訊器材配件Communication accessories對講機外殼、天線座、背夾、電池殼、充電座件。Radio housings, antenna bases, belt clips, battery cases, charger parts.
06
汽車零配件Automotive parts內飾塑膠件、金屬支架與車削小件。Interior plastic parts, metal brackets and small turned components.
07
電腦與電子配件Computer & electronics機箱件、散熱支架、絕緣件與精密小五金。Chassis parts, heatsink mounts, insulating parts and small precision hardware.
08
家用電器配件Home appliance parts外殼、旋鈕、卡扣、面板與內部結構件。Housings, knobs, clips, panels and internal structural parts.
09
智能家居配件Smart home parts感測器殼、控制面板、壁掛底座與精密小五金。Sensor casings, control panels, wall mounts and small precision hardware.

零件實拍Parts we have made

Parts
鋁件:密集凸台結構 鋁件 · 密集凸台結構 Aluminium · dense boss structure
鋁件:曲面與細紋銑削 鋁件 · 曲面與細紋銑削 Aluminium · curved surface, fine milling
鋁件:大腔體銑削 鋁件 · 大腔體銑削 Aluminium · large cavity milling
鋁件:內腔與薄壁 鋁件 · 內腔與薄壁 Aluminium · inner cavity & thin walls
鋁件:散熱鰭片機箱 鋁件 · 散熱鰭片機箱 Aluminium · finned enclosure
透明件:定位板與治具 透明件 · 定位板與治具 Transparent · locating plate & fixture
車削件:接頭與螺紋 車削件 · 接頭與螺紋 Turned parts · connectors & threads
鋁件:陽極氧化 鋁件 · 陽極氧化 Aluminium · anodised
大型車件:環形法蘭面 大型車件 · 環形法蘭面 Large turned part · ring & flange
塑料車件:內孔與端面 塑料車件 · 內孔與端面 Plastic turned part · bore & face
注塑外殼:曲面與卡扣 注塑外殼 · 曲面與卡扣 Moulded housing · curved face & snaps
注塑殼體:加強筋與卡扣位 注塑殼體 · 加強筋與卡扣位 Moulded case · ribs & latch

以上為實際出貨件。可依圖複製同類件,先打樣再量產;涉及客戶品牌的件不在網站展示。

Parts we have actually shipped. Similar parts can be reproduced to your drawings — sample first, then volume. Customer-branded parts are not shown here.

車間與模具Workshop & tooling

Workshop
廠區門口:東莞市金致誠塑膠五金科技有限公司 廠區門口 Factory entrance
注塑車間 注塑車間 Injection workshop
CNC 加工區:加工中心與數控車床 CNC 加工區 CNC area
數控車床加工區,配機械手上下料 數控車床區 Turning area
多穴注塑模具腔板 塑膠模具 · 多穴腔板 Injection mould · multi-cavity plate
熱流道注塑模具 塑膠模具 · 熱流道 Injection mould · hot runner
五金連續模 五金連續模 Progressive stamping die

以上為廠內實拍,非圖庫素材。想看某一類件的實物與量產狀態,來信索取即可。

All photographs taken on our own floor — no stock imagery. Ask us for photos of a specific part type in production.

合作流程How we work

Steps
01圖面與需求Drawings in提供 2D/3D 圖、材料與批量,我們先看能不能做。Send 2D/3D files, material and volume; we check feasibility first.
02報價與建議Quote & feedback回報模具費與單價,並就結構、脫模與公差提建議。Tooling cost and unit price, plus notes on structure, draft and tolerances.
03開模與打樣Tool & sample開模 25–30 天,T1 樣品 7–10 天,附尺寸檢驗。25–30 days to tooling, T1 in 7–10 days, with dimensional checks.
04小批量試產Pilot run確認外觀、色差與裝配互換,再定量產條件。Confirm appearance, colour and interchangeability before volume terms.
05量產與檢驗Production首件檢查、巡檢與出貨前抽檢,可附檢驗報告。First-article, in-process and pre-shipment inspection; reports available.

聯絡我們Contact

Contact

看圖報價不需要走流程:把圖面與需求寄過來,我們回一份可執行的報價與建議。

No process to enter: send drawings and requirements, and you get back an actionable quote.

聯絡人ContactTina(鍾小姐)Tina Zhong
Tel / WhatsApp+86 180 2892 3056
Line+852 9493 1305
地址Address廣東省東莞市鳳崗鎮龍平西路麗之健科技園Lizhijian Technology Park, Longping West Road, Fenggang Town, Dongguan, Guangdong, China